Shin/Thigh Belts

Prepare the required components

Prepare the Holder, Belt, and Hook.
Place the belt with the hook-and-loop surface facing upward.

Thread the belt

Insert the belt into the holder from the left side, with the USB notch on the holder facing towards you.

Attach the hook

Run the belt through the hook, making sure the raised part faces upward, then fasten it using the hook-and-loop surface.

Secure the Hook

Attach the hook to the mounting slot to secure it.

Adjust the belt

Adjust the belt length to fit your leg.
After adjustment, the hook allows quick attachment and removal.